What is a bone scan?
A bone scan is a radiology procedure used to look at the skeleton. It is done to find areas of physical and chemical changes in bone. A bone scan may also be used to see if treatment of certain conditions is working.
A bone scan is a type of nuclear radiology procedure. This means that a tiny amount of a radioactive substance is used during the scan to assist in the exam of the bones. The radioactive substance, called a radionuclide, or radioactive tracer, collects in abnormal areas of bone.
The radionuclide emits a type of radiation, called gamma radiation. The gamma radiation is detected by a scanner, which processes the information into a picture of the bones.
The areas where the radionuclide collects are called "hot spots." They may be a sign of conditions such as cancerous bone tumors, metastatic bone cancer (cancer that has spread from another site, such as the lungs, to the bones), bone infection, bone injury not seen on a regular X-rays, and other conditions of the bone.
Why might I need a bone scan?
Bone scans are most commonly used to look for the spread of cancer. Because cancer cells multiply rapidly, they will appear as a hot spot on a bone scan. This is due to increased bone activity in the area of the cancer cells. Bone scans may also be used to see how much cancer there is before and after treatment in order to see if the treatment is working.
Other reasons for doing a bone scan may include:
- To assess for bone injury or damage when regular X-rays do not show the problem
- To find fractures that are hard to locate
- To determine the age of fractures
- To detect and/or assess bone infection (called osteomyelitis)
- To look for the cause of unexplained bone pain
- To detect conditions such as:
- Benign (non-cancerous) bone tumors
- Paget's disease (a bone disorder, usually occurring in people over age 50, in which there is chronic inflammation of the bones, leading to thickening and softening of the bones, and curving of the long bones)
- Avascular necrosis (death of bone tissue not due to infection)
There may be other reasons for your doctor to recommend a bone scan.
What are the risks of a bone scan?
The amount of the radionuclide injected into your vein for the procedure is small enough that there is no need for precautions against radioactive exposure. The injection of the tracer may cause some slight discomfort. Allergic reactions to the tracer are rare, but may occur.
If you are allergic to or sensitive to medications, contrast dyes, or latex, be sure to tell your doctor.
If you are pregnant, think you might be, are lactating, or breastfeeding, tell your health care provider.
There may be other risks depending on your specific medical condition. Be sure to discuss any concerns with your doctor prior to the procedure.
How do I get ready for a bone scan?
- Your doctor will explain the procedure to you and you can ask questions.
- You will be asked to sign a consent form that gives your permission to do the test. Read the form carefully and ask questions if anything is not clear.
- Generally, no prior preparation, such as not eating or not taking medicine, is needed before a bone scan.
- Be sure to tell your doctor, the radiologist, or the technologist if you are allergic to or sensitive to medications, contrast dyes, and/or iodine.
- Tell your doctor if you are pregnant or think you may be.
- Make sure your doctor has a list of all medications (prescribed and over-the-counter) and all herbs, vitamins, and supplements that you are taking.
- Based on your medical condition, your doctor may give you other instructions on what to do before the bone scan.
What happens during a bone scan?
A bone scan may be done on an outpatient basis or as part of your stay in a hospital. Procedures may vary depending on your condition and your doctor's practices.
Generally, a bone scan follows this process:
- You will be asked to remove any clothing, jewelry, or other objects that may get in the way of the scan. A bracelet with your name and an identification number may be put on your wrist. You may get a second bracelet if you have allergies.
- If you are asked to remove your clothing, you will be given a gown to wear.
- An intravenous (IV) line will be started in your hand or arm for injection of the radioactive tracer.
- The tracer will be injected into your vein. The tracer will be allowed to collect in the bone tissue for a period of 1 to 3 hours. You may be allowed to walk around or even leave the facility during this time. You will not be hazardous to other people, as the tracer emits less radiation than a standard X-ray.
- During the waiting period, you will need to drink several glasses of water (4 to 6 glasses) to help flush out any tracer that does not collect in the bone tissue.
- If your bone scan is being done to look for bone infection, a set of scans may be done right after the injection of the tracer. Another set of scans will be done after the tracer has been allowed to collect in the bone tissue.
- When the tracer has been allowed to collect in the bone tissue for the right amount of time, you will be asked to empty your bladder. This is because a full bladder can distort the bones of the pelvis, and may become uncomfortable during the scan, which may take up to an hour to complete.
- You will be asked to lie still on a padded scanning table. Any movement may affect the quality of the scan.
- The scanner will move slowly over and around you several times as it detects the gamma rays emitted by the tracer in the bone tissue.
- You may be repositioned during the scan in order to get certain views of the bones.
- When the scan has been completed, the IV line will be removed.
While the bone scan itself causes no pain, having to lie still for the length of the procedure might be uncomfortable, particularly if you have recently had surgery or an injury. The technologist will use all possible comfort measures and complete the procedure as quickly as possible to minimize any discomfort or pain.
What happens after a bone scan?
Move slowly when getting up from the scanner table to avoid any dizziness or lightheadedness.
You will be instructed to drink plenty of fluids and empty your bladder often for 24 to 48 hours after the scan. This will help flush the remaining tracer from your body.
The IV site will be checked for any signs of redness or swelling. If you notice any pain, redness, and/or swelling at the IV site after you go home, you should tell your doctor as this may be a sign of infection or other type of reaction.
You should not have any other radionuclide procedures for the next 24 to 48 hours after your bone scan.
You may go back to your usual diet and activities, unless your doctor tells you differently.
Your doctor may give you other instructions after the procedure, depending on your particular situation.
Next stepsBefore you agree to the test or the procedure make sure you know:
- The name of the test or procedure
- The reason you are having the test or procedure
- The risks and benefits of the test or procedure
- When and where you are to have the test or procedure and who will do it
- When and how will you get the results
- How much will you have to pay for the test or procedure